Message boards :
Number crunching :
Need help with this one
Message board moderation
Author | Message |
---|---|
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
So my computer has stopped crunching and I get the following error on the Boinc manager task (scheduler wait:Cuda runtime, memory related failure, theadsafe temporary Exit) Tried turning off the computer and then restarting but the messages continue. Any ideas? Zalster |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
Reading older threads on this warning, try reseating the videocard first. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Ok, found this. Now to decipher it slot 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
slot 6 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 2 setiathome_CUDA: CUDA Device 2 specified, checking... Device 2: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1123 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 2 setiathome_CUDA: CUDA Device 2 specified, checking... Device 2: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1123 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Link to the Wu please. Possibly related to: WUs with very unusual Autocorr parameters Yesterday I got 4 tasks from the 10fe09ab.22806.* splitter run with short estimates, today 2 more from 10fe09ab.1847.* . All have Claggy |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
slot 9 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 setiathome_CUDA: Found 3 CUDA device(s): Device 1: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 5, pciSlotID = 0 Device 2: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 1, pciSlotID = 0 Device 3: GeForce GTX 780, 3072 MiB, regsPerBlock 65536 computeCap 3.5, multiProcs 12 pciBusID = 2, pciSlotID = 0 In cudaAcc_initializeDevice(): Boinc passed DevPref 1 setiathome_CUDA: CUDA Device 1 specified, checking... Device 1: GeForce GTX 780 is okay SETI@home using CUDA accelerated device GeForce GTX 780 pulsefind: blocks per SM 4 (Fermi or newer default) pulsefind: periods per launch 100 (default) Priority of process set to BELOW_NORMAL (default) successfully Priority of worker thread set successfully setiathome enhanced x41zc, Cuda 4.20 Detected setiathome_enhanced_v7 task. Autocorrelations enabled, size 0k elements. Work Unit Info: ............... WU true angle range is : 0.545577 Kepler GPU current clockRate = 1071 MHz re-using dev_GaussFitResults array for dev_AutoCorrIn, 256 bytes re-using dev_GaussFitResults+32x8 array for dev_AutoCorrOut, 256 bytes Thread call stack limit is: 1k Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument Exiting cudaAcc_free() called... cudaAcc_free() running... cudaAcc_free() PulseFind freed... cudaAcc_free() Gaussfit freed... cudaAcc_free() AutoCorrelation freed... cudaAcc_free() DONE. Cuda sync'd & freed. Preemptively acknowledging a safe temporary exit-> Exit Status: 0 boinc_exit(): requesting safe worker shutdown -> boinc_exit(): received safe worker shutdown acknowledge -> Cuda threadsafe ExitProcess() initiated, rval 0 |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14671 Credit: 200,643,578 RAC: 874 |
So, which machine is this on? The one with three GTX 780 appears to be host 7135571, but that one has no work in progress on this project (not even any reported today). I'm asking, because the symptom Error on launch (ac_reducePartial<<<grid3, block3,blksize*sizeof(float3)>>>( (float *)dev_AutoCorrIn, dev_ac_partials )), file c:/[Projects]/__Sources/sah_v7_opt/Xbranch/client/cuda/cudaAcc_autocorr.cu, line 200: invalid configuration argument possibly matches Beta message 53309 by Joe Segur - in which case, it might have been data related. Link to one of the WUs in question, please? |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Sorry, Yes it is the 780 but over on Beta. I was running it there since things here went bonkers. Sorry at work and going back and forth, I'll see if I can add a link Zalster |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
I tried to reset the project and send new one, before that I had 1 go invalid http://setiweb.ssl.berkeley.edu/beta/workunit.php?wuid=6781709 Since then, the ones that I downloaded have also stalled Edit.. Here is link to new work unit http://setiweb.ssl.berkeley.edu/beta/workunit.php?wuid=6782596 |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
I didn't see Joe's message until right now. Interesting but this is over my head. hmm |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Ok, Now the machine with the 980s is doing it as well. That make me think it's the Multibeams over at Beta that are the problem. I'm going to suspend them and try MB here on main and if those work then I know 100% what the issue is. Thanks Everyone Zalster Edit.. Yup that is it.. MB here on Main working just fine. GPUs kicking in and ramping up. |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14671 Credit: 200,643,578 RAC: 874 |
Well, it's the same tape as Joe's report, and - more crucially - it has the same autocorr configuration: <analysis_cfg> Since it doesn't seem likely that these tasks are going to finish and report cleanly, could you please: Move the discussion to Joe's thread at Beta Post that std_err you gathered manually Switch to a newer version of BOINC which preserves std_err in the report if you have to abort the tasks See if you can wake Jason up and point him to these reports. He needs to chat with Joe and Eric to find out if these configurations are a mistake, or something he needs to prepare a new application for. Edit - re my third point (newer version of BOINC) - any version 7.3.14 or later, where "client: read stderr file if abort non-running job." came in. Personally, I'd strongly advise v7.4.36 - the current alpha release candidate. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Ok, I'll get started on some of those. Wake Jason up? lol I'd need his cell phone number for that, but I'll see what I can do. Zalster |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14671 Credit: 200,643,578 RAC: 874 |
(see edit to previous re the BOINC version) |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.