I've released a Astropulse 5.00 application for HPUX 11i V.1..3 on PARISC


The following Astropulse 5.00 applications are available :

- Offical Astropulse application from the project :
Windows x86
Linux x86
Linux x86_64

- http://www.dotsch.de/seti :
FreeBSD i386
HPUX 11i PARISC 2.0 (64 bit)
Linux IA64
Linux PowerPC/Power
MacOS =>10.4 Intel
MacOS =>10.4 PowerPC
OpenBSD i386
NetBSD i386
NetBSD x86_64/AMD64
Solaris SPARC
Solaris 10 x86
In work : AIX, FreeBSD x86_64, HPUX IA64, Linux PS3 and OpenBSD x86_64

Any more porting wishes ?

No more AP for PS3? It's on your site but without a link

---

No more AP for PS3? It's on your site but without a link

The Astropulse binaries for PS3, AIX, FreeBSD x86_64 and HPUX IA64 are in work in the momtent.

Today the FreeBSD port astro/boinc-setiathome-enhanced got updated. It installs setiathome 6.03 and astropulse 5.00 from source.

---

Today the FreeBSD port astro/boinc-setiathome-enhanced got updated. It installs setiathome 6.03 and astropulse 5.00 from source.

This would not have been possible without Dotsch' help. Thanks Dotsch!

---

I've published the diffs between archives as used by the FreeBSD port and the Berkeley sources at ftp://rene-ladan.nl/pub/freebsd/seti_boinc-r333-port.diff and ftp://rene-ladan.nl/pub/freebsd/astropulse-r354-port.diff

---

Gaurav has build a Astropulse 5 application which uses the SPEs of the PS3. The application is available for download on my homepage (http://www.dotsch.de/seti).
Thank you very much, Gaurav !

My BOINC manager has (today) downloaded astropulse_5.03_x86_64-pc-linux-gnu and is happily crunching a WU. However, when I examine the executable (Linux "file") it is an "ELF 32-bit LSB executable". I was expecting a 64-bit version. OBTW, the astropulse_5.00_x86_64* previously loaded executable is also ELF 32-bit.
The file "setiathome-5.28.x86_64-pc-linux-gnu" is an "ELF 64-bit LSB executable" as I would have expected.
So, I am wondering if the Astropulse 64-bit (x86_64) is not out of testing yet and a 32-bit version is a temporary "place holder" or if the wrong file was inadvertently put in the x86_64 slot?

It appears harmless that I now have 2 astropulse executables (5.00 and 5.03) in the projects folder. BOINC manager seems to have picked the 5.03 version to use with the current WU. Is there any harm in deleting the 5.00 files? Or, will BOINC manager automatically clean out obsolete versions sometime after newer versions are loaded?

---

I've released binaries for the new Astropulse 5.03 applications for MacOS Intel, MacOS PowerPC and FreeBSD i386. They are available on my Homepage http://www.dotsch.de/seti

I've fixed a wrong app_info.xml in the Astropulse 5.03 FreeBSD i386, MacOS Intel and PPC applications. I am very sorry for the failure ! Thanks to Arkayn for reporting the problem !

I've released a Astropulse 5.03 application for Linux on IA64 (Itanium).

I've released a Astropulse 5.03 application for Linux for the PowerPC/Power architecture.

I've released a Astropulse 5.03 application for Solaris 10 x86 / Open Solaris x86 for the x86 architecture.

I've released a Astropulse 5.03 application for OpenBSD i386/x86 and NetBSD i386/x86.

And also a NetBSD x86/x86_64/AMD64 Astropulse 5.03 is now also available.

I have released Astropulse 5.03 applications for FreeBSD x64/AMD64 and OpenBSD x64/AMD64.
Any more platform wishes ?

Hello !

i've installed Boinc as binary on Core-Linux w kernel 2.4.37 built by my minimalistic fashion running on VIA processor ( look at log sniplets below ).

i really wish to help SETI but there appears to be some problem as there is only 'computation error' results...

( i've used classic SETI application years ago and tried to use Boinc some time ago by compiling it from source got from Erik J. Korpela of SETI - but without success. Using prebuilt binaries is not my style - but ... )

First i got some 'ERROR: Kernel too old' messages but replaced the SETI app with older version by adding 'app_info.xml' ( look below )

-------------stdoutdae.txt sniplet 1 begins--------------

01-Jun-2009 04:38:02 [---] Starting BOINC client version 6.4.5 for i686-pc-linux-gnu
01-Jun-2009 04:38:02 [---] log flags: task, file_xfer, sched_ops
01-Jun-2009 04:38:02 [---] Libraries: libcurl/7.18.0 OpenSSL/0.9.8g zlib/1.2.3 c-ares/1.5.1
01-Jun-2009 04:38:02 [---] Running as a daemon
01-Jun-2009 04:38:02 [---] Data directory: /opt/BOINC
01-Jun-2009 04:38:02 [SETI@home] Found app_info.xml; using anonymous platform
01-Jun-2009 04:38:02 [---] Processor: 1 CentaurHauls VIA Samuel 2 [Family 6 Model 7 Stepping 3]
01-Jun-2009 04:38:02 [---] Processor features: fpu de tsc msr cx8 mtrr pge mmx 3dnow
01-Jun-2009 04:38:02 [---] OS: Linux: 2.4.37
01-Jun-2009 04:38:02 [---] Memory: 122.89 MB physical, 486.33 MB virtual
01-Jun-2009 04:38:02 [---] Disk: 1.84 GB total, 1.35 GB free
01-Jun-2009 04:38:02 [---] Local time is UTC +3 hours
01-Jun-2009 04:38:02 [---] Not using a proxy
01-Jun-2009 04:38:02 [---] Can't load library libcudart
01-Jun-2009 04:38:02 [---] No coprocessors
01-Jun-2009 04:38:02 [---] Already attached to http://setiathome.berkeley.edu/
01-Jun-2009 04:38:02 [SETI@home] URL: http://setiathome.berkeley.edu/; Computer ID: 4963696; location: home; project prefs: defau
lt
01-Jun-2009 04:38:02 [---] General prefs: from SETI@home (last modified 01-Jun-2009 00:14:56)
01-Jun-2009 04:38:02 [---] Computer location: home
01-Jun-2009 04:38:02 [---] General prefs: no separate prefs for home; using your defaults
01-Jun-2009 04:38:02 [---] Preferences limit memory usage when active to 61.44MB
01-Jun-2009 04:38:02 [---] Preferences limit memory usage when idle to 110.60MB
01-Jun-2009 04:38:02 [---] Preferences limit disk usage to 0.55GB
01-Jun-2009 04:38:02 [SETI@home] Sending scheduler request: To fetch work. Requesting 21601 seconds of work, reporting 0 completed tasks

-------------stdoutdae.txt sniplet 1 ends--------------

-------------stdoutdae.txt sniplet 2 begins--------------

01-Jun-2009 14:35:52 [SETI@home] Scheduler request completed: got 1 new tasks
01-Jun-2009 14:35:54 [SETI@home] Started download of 12mr09ag.28668.456214.7.8.19
01-Jun-2009 14:35:59 [SETI@home] Finished download of 12mr09ag.28668.456214.7.8.19
01-Jun-2009 14:36:00 [SETI@home] Starting 12mr09ag.28668.456214.7.8.19_1
01-Jun-2009 14:36:00 [SETI@home] Starting task 12mr09ag.28668.456214.7.8.19_1 using setiathome_enhanced version 528
01-Jun-2009 14:36:01 [SETI@home] Computation for task 12mr09ag.28668.456214.7.8.19_1 finished
01-Jun-2009 14:36:01 [SETI@home] Output file 12mr09ag.28668.456214.7.8.19_1_0 for task 12mr09ag.28668.456214.7.8.19_1 absent
01-Jun-2009 14:37:04 [SETI@home] Sending scheduler request: To fetch work. Requesting 21601 seconds of work, reporting 1 complet
ed tasks
01-Jun-2009 14:37:09 [SETI@home] Scheduler request completed: got 1 new tasks
01-Jun-2009 14:37:12 [SETI@home] Started download of 12mr09ag.28668.456214.7.8.230
01-Jun-2009 14:37:18 [SETI@home] Finished download of 12mr09ag.28668.456214.7.8.230
01-Jun-2009 14:37:19 [SETI@home] Starting 12mr09ag.28668.456214.7.8.230_0
01-Jun-2009 14:37:19 [SETI@home] Starting task 12mr09ag.28668.456214.7.8.230_0 using setiathome_enhanced version 528
01-Jun-2009 14:37:20 [SETI@home] Computation for task 12mr09ag.28668.456214.7.8.230_0 finished
01-Jun-2009 14:37:20 [SETI@home] Output file 12mr09ag.28668.456214.7.8.230_0_0 for task 12mr09ag.28668.456214.7.8.230_0 absent
01-Jun-2009 14:38:23 [SETI@home] Sending scheduler request: To fetch work. Requesting 21601 seconds of work, reporting 1 complet
ed tasks
01-Jun-2009 14:38:28 [SETI@home] Scheduler request completed: got 1 new tasks
01-Jun-2009 14:38:31 [SETI@home] Started download of 02mr09ab.12439.12751.14.8.131
01-Jun-2009 14:38:38 [SETI@home] Finished download of 02mr09ab.12439.12751.14.8.131
01-Jun-2009 14:38:39 [SETI@home] Starting 02mr09ab.12439.12751.14.8.131_1
01-Jun-2009 14:38:39 [SETI@home] Starting task 02mr09ab.12439.12751.14.8.131_1 using setiathome_enhanced version 528
01-Jun-2009 14:38:40 [SETI@home] Computation for task 02mr09ab.12439.12751.14.8.131_1 finished
01-Jun-2009 14:38:40 [SETI@home] Output file 02mr09ab.12439.12751.14.8.131_1_0 for task 02mr09ab.12439.12751.14.8.131_1 absent
01-Jun-2009 14:39:43 [SETI@home] Sending scheduler request: To fetch work. Requesting 21601 seconds of work, reporting 1 complet
ed tasks
01-Jun-2009 14:39:48 [SETI@home] Scheduler request completed: got 0 new tasks
01-Jun-2009 14:39:48 [SETI@home] Message from server: No work sent
01-Jun-2009 14:39:48 [SETI@home] Message from server: (reached daily quota of 25 results)
01-Jun-2009 14:39:48 [SETI@home] Message from server: (Project has no jobs available)

-------------stdoutdae.txt sniplet 2 ends--------------

-------------app_info.xml begins--------------

<app_info>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>setiathome-5.27.i686-pc-linux-gnu</name>
<executable/>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>528</version_num>
<file_ref>
<file_name>setiathome-5.27.i686-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
</app_version>
</app_info>

-------------app_info.xml ends--------------

Thanks for your comments !


/mc

---

mc: keep-IT-simple

I have released a Astropulse 5.06 binary for HPUX on PARISC 2.0 (64 Bit).

I have released a Astropulse 5.06 binary for Linux on IA64 and Power/PowerPC/Power64/PowerPC64 and PS3 (as PPE only application with not ideal performance).

hmm well ill be getting a PC with 64Athlon II x4 62 or 630.... and running Ubuntu?? 10.04 possibly....

---