What do I have to say? My processor is bored. I know there are some issues but this is the picture how it looks last month...

2004-08-04 22:20:50 [SETI@home] Scheduler RPC to http://setiboincdata.ssl.berkeley.edu/sah_cgi/cgi failed
2004-08-04 22:20:50 [SETI@home] Scheduler RPC to http://setiboincdata.ssl.berkeley.edu/sah_cgi/cgi failed
2004-08-04 22:20:50 [SETI@home] No schedulers responded
2004-08-04 22:20:50 [SETI@home] No schedulers responded
2004-08-04 22:20:50 [SETI@home] Deferring communication with project for 3 hours, 33 minutes, and 36 seconds
2004-08-04 22:20:50 [SETI@home] Deferring communication with project for 3 hours, 33 minutes, and 36 seconds
2004-08-04 23:20:50 [SETI@home] Deferring communication with project for 2 hours, 33 minutes, and 36 seconds
2004-08-04 23:20:50 [SETI@home] Deferring communication with project for 2 hours, 33 minutes, and 36 seconds
2004-08-05 00:20:50 [SETI@home] Deferring communication with project for 1 hours, 33 minutes, and 36 seconds
2004-08-05 00:20:50 [SETI@home] Deferring communication with project for 1 hours, 33 minutes, and 36 seconds

What do you mean about last month? There where some serious issues with the project but you should have been able to connect throughout the laste month with several down times for sure.
----------------------------------
It sounds as if your were not able to connect throughout the whole month is that true??
If that´s so you have some serious issues with your network connection.

Sorry. It is as you said. But it happened quite often.
There is nothing wrong with my network connection.

> Sorry. It is as you said. But it happened quite often.
> There is nothing wrong with my network connection.
>
>

I'm new to SETI@home. I first installed v4.05 on 09-02-04 (last thursday) and it processed the first work successfully. But since then it hasn't been able to either send the finished work or get a new one to process. All Internet connections are fine (cable).

The recurring problem messages are like this:

--- - 2004-09-07 06:00:05 - Insufficient work; requesting more
SETI@home - 2004-09-07 06:00:05 - Requesting 16942 seconds of work
SETI@home - 2004-09-07 06:00:05 - Sending request to scheduler: http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi
SETI@home - 2004-09-07 06:00:08 - Scheduler RPC to http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi failed
SETI@home - 2004-09-07 06:00:08 - No schedulers responded
SETI@home - 2004-09-07 06:00:08 - Deferring communication with project for 2 hours, 8 minutes, and 40 seconds
SETI@home - 2004-09-07 07:00:08 - Deferring communication with project for 1 hours, 8 minutes, and 40 seconds
SETI@home - 2004-09-07 08:00:08 - Deferring communication with project for 8 minutes and 40 seconds


Any ideas? The same messages since last friday.

Well, I checked back my computer a couple of hours after I posted this message and "magically" it started working again...

> I'm new to SETI@home. I first installed v4.05 on 09-02-04 (last thursday) and
> it processed the first work successfully. But since then it hasn't been able
> to either send the finished work or get a new one to process. All Internet
> connections are fine (cable).
>
> The recurring problem messages are like this:
>
> --- - 2004-09-07 06:00:05 - Insufficient work; requesting more
> SETI@home - 2004-09-07 06:00:05 - Requesting 16942 seconds of work
> SETI@home - 2004-09-07 06:00:05 - Sending request to scheduler:
> http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi
> SETI@home - 2004-09-07 06:00:08 - Scheduler RPC to
> http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi failed
> SETI@home - 2004-09-07 06:00:08 - No schedulers responded
> SETI@home - 2004-09-07 06:00:08 - Deferring communication with project for 2
> hours, 8 minutes, and 40 seconds
> SETI@home - 2004-09-07 07:00:08 - Deferring communication with project for 1
> hours, 8 minutes, and 40 seconds
> SETI@home - 2004-09-07 08:00:08 - Deferring communication with project for 8
> minutes and 40 seconds
>
>
> Any ideas? The same messages since last friday.
>