Stats Status (Apr 16 2007)

Message boards : Technical News : Stats Status (Apr 16 2007)
Message board moderation

To post messages, you must log in.

Previous · 1 · 2

AuthorMessage
Profile KC5VDJ - Jim the Enchanter
Avatar

Send message
Joined: 17 May 99
Posts: 81
Credit: 4,083,597
RAC: 0
United States
Message 548758 - Posted: 18 Apr 2007, 22:54:07 UTC - in response to Message 548656.  


Some liquid coolers are not very reliable. One in one of my two CyberPowers started leaking last year and the whole machine had to be sent back and completely rebuilt. The result was repacking, driving to depot/paying shipping and almost two months downtime. If this happens again I'm s--t out of luck.


I'd read about some of that happening with some units when I was reading reviews of different types and brands.

From what I can tell, nobody has and such problems with Koolance.

Their clamps are good, and also, all of their external and block connections are using professional type of leak-proof connections (when filled, there can be a drop or two of leakage when disconnected, but that's it, and only during connect/disconnect.

Using a truly non-conducting liquid is the key in case of a leak. Despite the reviews, I'm careful to use non-conducting liquid. Don't use water, because even distilled water will gain conductivity as it passes across the metal in the blocks. When dealing with large water-cooled tubes, you are supposed to check the water conductivity on a regular basis (don't want ten to thirty thousand volts in the water), and from that experience, I choose not to use water.

The stuff I use is non-reactive and non-toxic. I've never had to deal with it, but in case of a major leak, they claim that a motherboard will continue to operate normal (assuming it doesn't fry due to lack of cooling).

Here's the stuff I'm using: Fluid XP+ Extreme Non-Conductive 32 oz. Liquid Cooling Fluid (UV ALIEN GREEN) from ArcticMod.
ID: 548758 · Report as offensive
Odysseus
Volunteer tester
Avatar

Send message
Joined: 26 Jul 99
Posts: 1808
Credit: 6,701,347
RAC: 6
Canada
Message 548845 - Posted: 19 Apr 2007, 3:05:09 UTC - in response to Message 548555.  
Last modified: 19 Apr 2007, 3:06:02 UTC

Boincstats has not yet shown a SETI update, but by their own posted numbers, their most recent daily update is almost 22 hours old at this moment.

My stats there are only partly updated; there are big spikes (at least 20,000 higher than usual) in the daily credit graphs but no corresponding numbers … I guess it’s just taking a while for their servers to update all the tables.

ID: 548845 · Report as offensive
Profile B0BHILL

Send message
Joined: 19 Jul 03
Posts: 23
Credit: 203,166
RAC: 0
United States
Message 548889 - Posted: 19 Apr 2007, 5:39:35 UTC

Just wondering when the world statistics will be updated? It has been 7 days now and after reading this thread I still don't know what is going on??
ID: 548889 · Report as offensive
W-K 666 Project Donor
Volunteer tester

Send message
Joined: 18 May 99
Posts: 19158
Credit: 40,757,560
RAC: 67
United Kingdom
Message 548912 - Posted: 19 Apr 2007, 6:42:59 UTC - in response to Message 548889.  

Just wondering when the world statistics will be updated? It has been 7 days now and after reading this thread I still don't know what is going on??

The stats have been available for over 24hrs now, but may have not been processed on your favourite stats site. On BOINCstats nearly 240 million credits were added to the Seti totals yesterday. And my account there has gone up 20k+.

Andy
ID: 548912 · Report as offensive
Profile Clyde C. Phillips, III

Send message
Joined: 2 Aug 00
Posts: 1851
Credit: 5,955,047
RAC: 0
United States
Message 549111 - Posted: 19 Apr 2007, 18:20:39 UTC - in response to Message 548757.  


Some liquid coolers are not very reliable. One in one of my two CyberPowers started leaking last year and the whole machine had to be sent back and completely rebuilt. The result was repacking, driving to depot/paying shipping and almost two months downtime. If this happens again I'm s--t out of luck.


Here's the stuff I'm using: Fluid XP+ Extreme Non-Conductive 32 oz. Liquid Cooling Fluid (UV ALIEN GREEN) from ArcticMod.


The stuff that leaked from my machine was green. It ran out of the case and damaged the tabletop some. I have a feeling that either Cooler Master or CyberPower (if it had had to disassemble the cooler) was to blame for the problem. Maybe the gaskets were broken or folded, or there was dirt there on assembly. Or maybe the bolts/screws/rivets weren't properly tightened. It appeared that most everything was replaced. Maybe it wasn't electrical conductivity but corrosion potential that caused the need for complete rebuild. A little probably splashed up onto the motherboard, and possibly more dripped because the machine was tilted during transport back to CyberPower.

ID: 549111 · Report as offensive
Previous · 1 · 2

Message boards : Technical News : Stats Status (Apr 16 2007)


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.